Samsung Galaxy S duos GT-S7562 Install stock rom

 Samsung Galaxy S duos GT-S7562 Install stock rom

---

This tutorial shows you how to Flash stock Firmware using Odin on Galaxy S Dous [S7562]

Requirements :--->

1. Odin3.07
2. Samsung Usb Driver
3. Stock Firmware
4. Official USB cable
5. Ofcourse Galaxy S Dous Phone 
note :-> click on above requirements to download them.. 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Flashing Tutorial :-->

1. Install usb drivers on pc....
2. reboot ur pc 
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy S duos device
6. Boot your S Duos device into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.

7. now ur phone will boot into download mode ........u will see a "WARNING" like following pic.....

8. now press "VOLUME UP" button to enter into download mode :--> like the following pic -->

9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.

10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.

11. click on PDA button && select the S7562XXXXXX_S7562XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]

12. now click on "START" button & it will take some time to flash the firmware ....

Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]

13. U will see a "PASS" & "RESET" on ODIN application...